2005 Subaru Legacy Owner's Manual - Page 353

Interior equipment 4. The garage door opener should now recognize the HomeLink® Wireless Control System and your garage door opener should activate when the HomeLink® button is pressed. NOTE If any of the HomeLink® buttons are already programmed for other devices, skip step 2 because it clears the memory of all three buttons. 3. Hold the end of the entrance gate's/garage door opener's hand-held transmitter between 1 and 3 inches (25 and 76 mm) away from the HomeLink® buttons on the driver's sun visor, keeping the indicator light in view. ! Programming for entrance gates and garage door openers in Canada 1. Unplug the motor of the entrance gate or garage door opener from the outlet. UB6220BA UB6223BA 2. Press and hold the two outside buttons until the HomeLink® indicator light begins to flash (after 20 seconds). Release both buttons. 4. Press and hold the desired HomeLink® button. 5. Press and release ("cycle") the hand-held transmitter button every two seconds until step 6 is complete. 6. When the indicator light flashes slowly and then 6-36