2009 Subaru Tribeca Owner's Manual - Page 103

Keys and doors 2-7 door locking switches. & Key lock-in prevention function This function prevents the doors from being locked with the key still in the ignition switch. ! Behavior with key lock-in prevention function operational With either the driver's or front passenger's door open, the doors automatically remain unlocked even if the " " side of the door locking switch is pushed. ! Behavior with key lock-in prevention function non-operational . If the lock lever is turned to the rear ("LOCK") position with the driver's door open and the driver's door is then closed with the lock lever in that position, the driver's door is locked. . If the spare key is used to lock the driver's door from the outside of the vehicle, the door is locked. . It is possible to lock the all doors and the rear gate by holding the " " side of the door locking switch pushed for 3 seconds with the driver's door open and then closing the driver's door. This function's operational/non-opera- tional setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details. NOTE When leaving the vehicle, make sure you are holding the key before locking the doors. Front passenger's switch 1) Lock 2) Unlock All doors and the rear gate can be locked and unlocked by the power door locking switches located at the driver's side and the front passenger's side doors. To lock all doors and the rear gate, push the " " side of the switch. To unlock all doors and the rear gate, push the " " side of the switch. When you close the doors after you set the door locks, the doors remain locked. NOTE Make sure that you do not leave the key inside the vehicle before locking the doors from the outside using the power