2009 Subaru Tribeca Owner's Manual - Page 372

11-48 Maintenance and service 1. Wrap a flat-head screwdriver in vinyl tape or cloth, insert it into the gap between the license plate light assembly and the rear gate. 2. Carefully pry the light assembly to remove it. & Dome light 3. Remove the bulb socket from the license plate light assembly by turning it counterclockwise. 4. Pull the bulb out of the socket. Install a new bulb. 5. Set the bulb socket into the license plate light assembly and turn it clockwise until it locks. 6. Reinstall the license plate light assembly to the rear gate. Vehicles with Rear Seat Entertainment Vehicles without Rear Seat Entertainment 1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.