2009 Subaru Tribeca Owner's Manual - Page 306

9-8 In case of emergency 8. Loosen the wheel nuts using the wheel nut wrench but do not remove the nuts. head engages firmly into the jack-up point. Chrome plated wheels 7. Insert the tip (wrapped in vinyl tape or a cloth) of a flat-head screwdriver into the slot between the wheel and cap. Use it to remove the cap. (Only vehicle equipped with chrome plated wheels) 9. Place the jack under the side sill at the front or rear jack-up point closest to the flat tire. 10. Insert the jack handle into the jackscrew, and turn the handle until the tire clears the ground. Do not raise the vehicle higher than necessary. 11. Remove the wheel nuts and the flat tire. 12. Remove the tire cover if the temporary spare tire has a cover. Turn the jackscrew by hand until the jack