2009 Subaru Tribeca Owner's Manual - Page 267

Starting and operating 7-31 vehicle reaches the desired speed. meter. The vehicle will maintain the desired speed. Vehicle speed can be temporarily increased while driving with the cruise control activated. Simply depress the accelerator pedal to accelerate the vehicle. When the accelerator pedal is released, the vehicle will return to and maintain the previous cruising speed. position. The cruise control set indicator light on the combination meter turns off when the cruise control is canceled. To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the control lever upward in the "RES/ACC" direction to return to the original cruising speed automatically. The cruise control set indicator light on the combination meter will automatically illuminate at this time. & To temporarily cancel the cruise control 3. Push the control lever downward in the "SET/COAST" direction and release it. Then release the accelerator pedal. There are three ways to cancel the cruise control temporarily: & To turn off the cruise control There are two ways to turn off the cruise control: . Push the main switch again. . Turn the ignition switch to the "Acc" or "LOCK" position (but only when the vehicle is completely stopped). At this time, the cruise control set indicator light is illuminated on the combination . Pull the control lever toward you. . Depress the brake pedal. . Shift the selector lever into the "N" - CONTINUED -