2009 Subaru Tribeca Owner's Manual - Page 109
2009 Subaru Tribeca Manual
Page 109 highlights
Keys and doors 2-13 form the whole procedure again beginning with part 1. 4. Open and close the door once within 15 seconds. times as the leftmost digit of the transmitter code. For example, push the locking switch eight times if the leftmost digit of the code is 8. NOTE . When part 4 of the procedure is completed, an electronic tone will sound for 30 seconds. . If you do not perform the operations in part 4 within 15 seconds, an error will occur and the electronic tone will not sound. In this event, perform the registration steps again beginning with part 3 of the procedure. NOTE . The electronic tone will stop sounding when you start entering the number. . If you do not start entering the number using the lock knob before the electronic tone stops sounding, an error will occur. In this event, perform the registration steps again beginning with part 3 of the procedure. . If the interval between one push of the knob and the next exceeds 5 seconds, an error will occur. In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3. 1) 2) LOCK ON (2) Insert the key into the ignition switch, then turn it from the "LOCK" position to the "ON" position 10 times within 15 seconds. NOTE . When you complete step (2), an electronic tone will sound once, a buzzer will continue to sound and the interior light will continue to flash until the transmitter codes are completely registered. . If you do not perform steps (1) and (2) within 45 seconds, an error will occur. Neither an electronic tone nor the buzzer will sound, and the interior lamp will not flash. In this event, per- 5. Before the electronic tone stops sounding, push the " " side of the power door locking switch the same number of - CONTINUED -