2010 Volvo S40 Owner's Manual - Page 248

10 Audio Radio functions When the search is completed, AUTO STORING will no longer be displayed. If there are no stations with sufficient signal strength, NO AST FOUND is displayed. The auto-stored stations can be selected using the preset buttons (2). ± Press EXIT (6) to terminate the automatic storing function. down the button until STATION STORED is displayed. The radio will then exit auto-store mode and the stored station can be selected by pressing the preset button. down the button until STATION STORED is displayed. The SCAN function will be deactivated and the station can be selected by pressing the preset button. 10 Scanning SCAN (4) automatically searches through the selected waveband for strong AM or FM stations. When the radio finds a station, that station will be played for approximately 8 seconds, after which scanning resumes. Radio text Certain stations broadcast program information, which can be shown in the display. To start this function: 1. Select FM1 or FM2 and press the MENU button. 2. Press ENTER. 3. Select RADIOTEXT in the menu and press ENTER. To deactivate this function, select RADIOTEXT again and press ENTER. When the radio is in auto-store mode, AUTO is shown in the display. AUTO disappears when you return to normal radio mode, which can be done by briefly pressing AM/FM (1), EXIT (6), or AUTO (7). To return to the Auto-store mode, press the AUTO button briefly and select a stored station by pressing one of the preset buttons (2). Activating/deactivating SCAN 1. Select radio mode using the AM/FM button (2). 2. Press SCAN to activate the function. SCAN is shown in the display. 3. Press the SCAN or EXIT button to deactivate the scan function and listen to the selected station. Saving auto-stored stations in the preset memory An auto-stored station can be saved in the memory for manually preset stations. 1. Press AUTO (7) briefly. > Auto is displayed. 2. Press one of the preset buttons (2) under which the station is to be stored. Hold Storing a station found with SCAN A station can be stored as a preset while the SCAN function is activated. ± Press one of the preset buttons (2) under which the station is to be stored. Hold 248