AEG BSK892330M User Manual - Page 53
Steam Cleaning, Cleaning Reminder, Cleaning the water, drawer
View all AEG BSK892330M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
11.4 Steam Cleaning Remove as much dirt as possible manually. Remove the accessories and the shelf support to clean the side walls. The steam cleaning functions support the steam cavity cleaning of the appliance. For a better performance you should start the cleaning function when the appliance is cool. The specified time is related to the duration of the function and does not include the time required for cleaning of the cavity by the user. When the steam cleaning function is active, the light is off. 1. Fill the water drawer to the maximum level. 2. Choose the steam cleaning function in the menu: Cleaning. Steam Cleaning - the duration of the function is around 30 minutes. a) Activate the function. b) An acoustic signal sounds when the programme is completed. c) Press the rotary knob to deactivate the signal. Steam Cleaning Plus - the duration of the function is around 75 minutes. a) Spray a suitable detergent uniformly in the oven cavity on both enamel and steel parts. Before you start the cleaning procedure, make sure that the appliance is cold. b) Activate the function. After around 50 minutes an acoustic signal sounds when the first part of the programme is completed. c) Wipe the internal surface of the appliance with a non-abrasive surface care sponge. You can use warm water or oven detergents to clean the cavity. XAM ENGLISH 53 d) The final part of the procedure starts. The duration of this stage is around 25 minutes. 3. Wipe the internal surface of the appliance with a non-abrasive sponge. You can use warm water to clean the cavity. 4. Remove the remaining water from the water drawer. After cleaning keep the appliance door open for approximately 1 hour. Wait until the appliance is dry. To speed up the drying you can heat up the appliance with hot air at temperature 150 °C for approximately 15 minutes. You can get maximum effects of the cleaning function if you manually clean the appliance immediately after the function ends. 11.5 Cleaning Reminder This function reminds you that the cleaning is necessary and that you should perform the function: Steam Cleaning Plus 11.6 Cleaning the water drawer Remove the water drawer from the appliance. 1. Remove the lid of the water drawer. Lift the cover in correspondence with the protrusion in the rear. 2. Remove the wave-breaker. Pull it away from the drawer body until it snaps out. 3. Wash the water drawer parts with your hands. Use tap water and soap. Do not use abrasive sponges. Do not put water drawer inside a dish washer. After you clean the water drawer parts, reassemble the water drawer.