AEG L75480WD Product Manual - Page 19
At The End Of The Programme
View all AEG L75480WD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
nutes or hours. The related symbols comes on. 2. Press button 4 , the appliance starts the countdown of the delay start. When the countdown is completed, the programme starts automatically. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. You cannot set the delay start with the Steam programme. CANCEL THE DELAY START 1. Press button 4 . The related indicator flashes. 2. Press button 5 again and again until the display shows 0'. 3. Press button 4 . The programme starts. ENGLISH 19 To open the appliance door: 1. Press button 4 . The door lock sym- bol in the display goes off. 2. Open the appliance door. 3. Close the appliance door and press button 4 . The programme or the delay start continues. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow: 1. Deactivate the appliance. 2. Wait for some minutes. 3. Make sure that no water is in the drum. If you deactivate the appliance, it is necessary to set the programme again. OPEN THE DOOR While a programme or the delay start operates, the appliance door is locked. AT THE END OF THE PROGRAMME • The appliance stops automatically. • The acoustic signals operate. • In the display comes on. • The indicator of the Start/Pause button 4 goes off. • The door lock symbol goes off. • Press button 1 to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle. • Remove the laundry from the appliance. Make sure that the drum is empty. • Keep the door ajar, to prevent mildew and odours. • Close the water tap. The washing programme is completed, but there is water in the drum: - The drum turns regularly to prevent the creases in the laundry. - The door stays locked. - You must drain the water to open the door. To drain the water: 1. If necessary, decrease the spin speed. 2. Press the Start/Pause button 4 . The appliance drain the water and spin. 3. When the programme is completed and the door lock symbol goes off, you can open the door 4. Deactivate the appliance. The appliance drain and spin automatically after approximately 18 hours.