AEG L75480WD Product Manual - Page 20
Using The Appliance - Drying Only
View all AEG L75480WD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 www.aeg.com USING THE APPLIANCE - DRYING ONLY WARNING! Set time value Open the water tap. Put the drain hose in the sink or connect to the drain pipe. • Load the laundry. • Turn the programme dial to the pro- gramme suitable for the items to dry. The drying symbol come on. • Each time you press this button the time value increases by 5 minutes. • After some seconds the time value on the display changes: the appliance calculates also the duration of the anticrease and the cooling phases. Final time value To have best performances in drying when you wash the laundry set a spin cycle at the maximum speed allowed for your type of items. You can dry your laundry in two ways: With the automatic drying: • press the button 8 again and again until a black line appears under one of the dryness level symbol: Extra dry symbol Cupboard dry symbol Iron dry symbol • The display shows a time value, calculated on a default load size. If the amount of your laundry is more or less than the default size, the appliance adjusts automatically the time value during the cycle. • Press the button 4 to start the programme. The door locked symbol comes on. The drying symbol starts to flash. You cannot set all levels for all type of laundry. With the timed drying: • Press the button 7 again and again to set the drying time value (see the «Programme for timed drying» table). The display shows a minimum time value. • Press button 4 to start the programme. The display shows the new time value every minute. The drying symbol starts to flash. The door locked symbol comes on. If you set the time value of only 10 minutes, the appliance performs only a cooling phase. At the end of the programme • The appliance stops automatically. • The acoustic signals operate. • In the display comes on. • The indicator of the Start/Pause button 4 goes off. The last minutes of the drying cycle the appliance performs the anti-crease and the cooling phases. • Press button 1 to deactivate the appliance. After some minutes from the end of the programme, the energy saving function automatically deactivates the appliance. • When the door locked symbol goes off, you can open the door. • Remove the laundry from the appliance. Make sure that the drum is empty. • Keep the door ajar, to prevent mildew and odours. • Close the water tap.