AEG L75480WD Product Manual - Page 5
CARE AND CLEANING, INSTALLATION, Water connection, Electrical connection - instructions
View all AEG L75480WD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
with a hinge on the opposite side in such a way that a full opening of the door is restricted. • Fabric softener or equivalent products must be used as specified by the fabric softener manufacturer. • Obey the safety instructions on the detergent packaging to prevent burns to eyes, mouth and throat. • Plastic items are not heat resistant. - If you use a detergent ball, remove it before you set the drying programme. - Do not use a detergent ball when you set a non-stop programme. WARNING! Risk of explosion or fire. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. if it is not possible to avoid it, fully rinse with extra water items cleaned with flammable products. • To prevent from the risk of self combustion do not stop the drying programme before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. WARNING! Risk of burns! • When you interrupt the drying programme, the laundry and the drum may be hot. Remove the laundry carefully. • Do not touch the glass of the door while a programme operates. The glass can be hot. ENGLISH 5 cleaning pads, solvents or metal objects. INSTALLATION • Remove all the packaging. • Do not install or use a damaged appli- ance. • Do not install or use the appliance where the temperature is less than 0 °C. • Obey the installation instruction sup- plied with the appliance. • Make sure that the floor where you in- stall the appliance is flat, stable, heat resistant and clean. • Do not install the appliance where the appliance door can not be fully opened. • Always be careful when you move the appliance because it is heavy. Always wear safety gloves. • Make sure that there is air circulation between the appliance and the floor. • Adjust the feet to have the necessary space between the appliance and the carpet. Water connection • Make sure not to cause damage to the water hoses. • Use only new hoses to connect the appliance to the water supply. Do not use old hoses again. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. CARE AND CLEANING WARNING! Risk of injury or damage to the appliance. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive Electrical connection • Make sure that the appliance is earthed. • Make sure that the electrical information on the rating plate agrees with the power supply. • Always use a correctly installed shockproof socket. • Do not use multiple plugs and extension cables. There is a risk of fire. • Do not replace or change the mains cable. Contact the service centre.