AEG ProTex Freestanding 60cm Washer Dryer White L87696WD Product Manual - Page 22
Daily Use - Drying Only
View all AEG ProTex Freestanding 60cm Washer Dryer White L87696WD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 www.aeg.com 9.16 AUTO Stand-by option The AUTO Stand-by function automatically deactivates the appliance to decrease the energy consumption when: • You do not use the appliance for 5 minutes before you press Start/Pause button. Press the button On/Off to activate the appliance again. • After 5 minutes from the end of the washing programme Press the button On/Off to activate the appliance again. 10. DAILY USE - DRYING ONLY The display shows the end of the last set programme. Turn the programme knob to set a new cycle. If you set a programme or an option that ends with water in the drum, the AUTO Stand-by function doesn't deactivate the appliance to remind you to drain the water. WARNING! Refer to Safety chapters. 10.1 Preparation to drying 1. Press button On/Off for some seconds to activate the appliance 2. Load the laundry one item at a time. 3. Turn the programme dial to the drying programme applicable for the items to dry. The display shows a minimum time value and the following symbols: To have best performances in drying when you wash the laundry set a spin cycle at the maximum speed allowed for your type of items. You can dry your laundry in two ways: 10.2 Automatic drying 1. Press button Drying Level repeatedly until a black line appears under one of the dryness level symbol: The drying symbol comes on. The anti-crease symbol comes on. The drying time symbol comes on. When drying a big amount of laundry, to have good drying performances, make sure that the laundry itself is not rolled up and that is uniformly distributed in the drum. Extra dry level Cupboard dry level Iron dry level The drying time symbol goes off The display shows a time value, calculated on a default load size. If the amount of your laundry is more or less than the default size, the appliance adjusts automatically the time value during the cycle. 2. Press button Start/Pause to start the programme. In the display: