AEG ProTex Freestanding 60cm Washer Dryer White L87696WD Product Manual - Page 25
At the end of the drying, programme, Fluff in the fabrics, How to remove the fluff, in the garments
View all AEG ProTex Freestanding 60cm Washer Dryer White L87696WD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
To have a good drying we suggest you to do not set a too low spin speed for the items to be washed and dried. 2. After some seconds the display shows the total duration of the cycles: Final time value (washing + drying + anti-crease + cooling phases) If you set a drying time of only 10 minutes, the final time value includes also the anti-crease and the cooling phases. 3. Press button Start/Pause to start the programme. The door is locked. The display shows the new time value each minute. 11.4 At the end of the drying programme 1. The appliance stops automatically. 2. The acoustic signals operate (if they are active). 3. In the display comes on. 4. The indicator of button Start/Pause goes off. 5. The last minutes of the drying cycle the appliance performs the anticrease phase. The anti-crease symbol flashes. The door is still locked (the symbol is on). 6. Press button On/Off for some seconds to deactivate the appliance. After some minutes from the end of the programme, the energy saving function automatically deactivates the appliance. ENGLISH 25 7. When the door locked light goes off you can open the door. 8. Remove the laundry from the appliance. Make sure that the drum is empty. 9. Keep the door ajar, to prevent mildew and odours. 10. Close the water tap. 11.5 Fluff in the fabrics During the washing and/or drying phase, some types of fabric, (sponge, wool, sweatshirt) could release fluff. The released fluff could stick to the fabrics during the next cycle. This inconvenient increases with technical fabrics. To prevent the fluff in your laundry, we recommend that you: • To do not wash dark fabrics after you washed and dried light coloured fabrics (new sponge, wool, sweatshirt ) and the contrary. • To dry this type of fabrics at open air when they are washed the first time. • To clean the drain filter. • After the drying phase, clean the empty drum, the gasket and the door with a wet cloth. 11.6 How to remove the fluff in the garments To remove the fluff inside the drum, set a special programme: 1. Empty the drum. 2. Clean the drum, the gasket and the door with a wet cloth. 3. Set the rinse programme. 4. Press at the same time Spin and Extra Rinse to activate the cleaning function until the display shows CLE. 5. Press Start/Pause to start the programme.