AEG ProTex Freestanding 60cm Washer Dryer White L87696WD Product Manual - Page 24
NON-STOP programme, Washing and Drying at, automatic levels, Washing and Timed, drying
View all AEG ProTex Freestanding 60cm Washer Dryer White L87696WD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 www.aeg.com 11.1 NON-STOP programme WARNING! Do not put a plastic device/ ball for the detergent into the drum. 1. Press button On/Off for some seconds to activate the appliance . 2. Load the laundry one item at a time. 3. Put the detergent and the additives in the appropriate compartment. 4. Turn the programme dial to the washing programme. The display shows the symbols of the different washing phases. 5. Set the available options. WARNING! Do not set a spin speed lower than the automatic speed of the set programme. 11.2 Washing and Drying at automatic levels 1. Press button Drying Level repeatedly until the black line appears under one of the dryness level symbol. The iron dry level The cupboard dry level The extra dry level The drying symbol comes on. The anti-crease symbol comes on. The display shows that the appliance is ready to start. The time value on the display is the duration of both cycles washing and drying, calculated on a default load size. To have a good drying the appliance does not let you set a too low spin speed for the items to be washed and dried. 2. Press button Start/Pause to start the programme. The set dryness level symbol stays on (e.g. Cupboard dry). The others level symbols go off. The door locked symbol comes on. The display shows the new time value each minute. The last minutes of the drying cycle the appliance performs the anti-crease and the cooling phases. 11.3 Washing and Timed drying WARNING! Do not put a plastic device/ ball for the detergent into the drum. 1. Press button Drying Time repeatedly to set the drying time value: The drying symbol comes on. The anti-crease symbol comes on. The drying time symbol comes on. The display shows the set drying value time . Set drying time value. Each time you press this button the time value increases by 5 minutes.