AIWA AWP-ZX7 Operating Instructions - Page 18

Tape - Recording To record a disc by specifying track order You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 6 of "Creating your own program" (page 13). Tip Recording your favorite CD tracks on a tape - CD-TAPE Synchro Recording You can record a whole CD on a tape. You can use TYPE I (normal) tape. Use buttons on the unit for the operation. If you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side. 1 2 Load a recordable tape. Load a CD you want to record. If you have already loaded the disc, press DISC 1 - 5 to select the disc, then press x. When you want to record an album from an MP3 disc, be sure to press PLAY MODE repeatedly to select ALBM, then use ALBUM - or + on the remote to select the desired album before proceeding. 3 Press CD SYNC. "CD SYNCHRO" appears. "REC" flashes. The tape deck stands by for recording and the CD player pauses for play. 4 5 Press DIRECTION repeatedly until g appears to record on one side or h (or j) to record on both sides. Press TAPE nN repeatedly to select recording side. If you select both sides recording or front side recording, press TAPE nN to light up the N indicator. If you record on the reverse side, press TAPE nN again to light up the n indicator. 6 Press z REC PAUSE/START. Recording starts. When the recording is completed, the CD player and the tape deck stop automatically. To stop recording Press x. 18GB