AIWA AWP-ZX7 Operating Instructions - Page 9

AIWA AWP-ZX7 Manual

Page 9 highlights

Attaching the speaker pads Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Setting the clock Getting Started Use buttons on the remote for the operation. 1 2 3 4 5 6 Press ?/1 to turn on the system. Press CLOCK/TIMER SET. Press . or > repeatedly to set the hour. Press ENTER. Press . or > repeatedly to set the minute. Press ENTER. When carrying this system Perform the following procedure to protect the CD mechanism. The clock starts working. To adjust the clock 1 2 3 Make sure that all discs are removed from the system. Press FUNCTION repeatedly to switch the function to CD. Hold down Z CD and then press M on the unit until "STANDBY" appears. After "STANDBY" disappears, then "LOCK" appears. Unplug the power cord. 1 2 3 Press CLOCK/TIMER SET. Press . or > until "CLOCK SET?" appears, then press ENTER. Do the same procedures as step 3 to 6 above. Notes 4 • The clock settings are canceled when you disconnect the power cord or if a power failure occurs. • You cannot set the clock in Power Saving Mode (page 23). 9GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Getting Started
9
GB
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Use buttons on the remote for the operation.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press
.
or
>
repeatedly to set the
hour.
4
Press ENTER.
5
Press
.
or
>
repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press
.
or
>
until “CLOCK SET?”
appears, then press ENTER.
3
Do the same procedures as step 3 to 6
above.
Notes
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
You cannot set the clock in Power Saving Mode
(page 23).
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1
Make sure that all discs are removed
from the system.
2
Press FUNCTION repeatedly to switch
the function to CD.
3
Hold down
Z
CD and then press
M
on
the unit until “STANDBY” appears.
After “STANDBY” disappears, then
“LOCK” appears.
4
Unplug the power cord.
Setting the clock