AIWA CX-NAJ54 Operating Instructions - Page 12

CD PLAYING BASIC OPERATIONS LOADING DISCS Press CD, then press z OPEN/CLOSE to open the disc compartment. Load disc(s) with the label side up. To play one or two discs, place the discs on tray 1 and 2. To play three discs, press DISC CHANGE to rotate the trays after placing two discs. Place the third disc on tray 3. Close the disc compartment by pressing z OPEN/CLOSE. To play one disc only, press DISC DIRECT PLAY 1-3. The selected disc is played once. To stop play, press s. To pause play, press a. To resume play, press again. To search for a particular point during playback, keep f or g pressed and release it at the desired point. To skip to the beginning of a track during playback, press f or g repeatedly or turn MULTI JOG. To remove discs, press z OPEN/CLOSE. To start play when the power is off (Direct Play Function) Press CD. The power is turned on and play of the loaded disc(s) begins. When z OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened. To check the remaining time During play (except random play or programmed play), press CD EDIT/CHECK. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above. When using the remote control, press CD EDIT/CHECK while pressing SHIFT. Selecting a track with the remote control 1 Press DISC DIRECT PLAY 1-3 to select a disc. 2 Press numbered buttons 0-9 and +10 to select a track. Example: To select the 25th track, press +10, +10 and 5. To select the 10th track, press +10 and 0. The selected track starts to play and continues to the end of that disc. Replacing discs during play While one disc is playing, the other discs can be replaced without interrupting play. 1 Press DISC CHANGE. 2 Remove the discs and replace with other discs. 3 Press z OPEN/CLOSE to close the disc compartment. Tray number of the disc to be played Total playing time Total number of tracks PLAYING DISCS Load discs. To play all discs in the disc compartment, press c. Play begins with the disc on tray 1. Number of track being played Elapsed playing time • When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray. • Do not place more than one compact disc on one disc tray. • Do not tilt the unit with discs loaded. Doing so may cause malfunctions. • Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions. • The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction. 12 ENGLISH