ASRock Z77 Extreme9 User Manual - Page 48
Onboard Headers and Connectors
View all ASRock Z77 Extreme9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2.13 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! SATA2_2 SATA2_4 SATA2_3 SATA2_5 Serial ATA2 Connectors (SATA2_2_3: see p.14, No. 15) (SATA2_4_5: see p.14, No. 16) These four Serial ATA2 (SATA2) connectors support SATA data cables for internal storage devices. The current SATA2 interface allows up to 3.0 Gb/s data transfer rate. Serial ATA3 Connectors (SATA3_A1_A2: see p.14, No. 12) (SATA3_A3_A4: see p.14, No. 13) (SATA3_0_1: see p.14, No. 14) These six Serial ATA3 (SATA3) connectors support SATA data cables for internal storage devices. The current SATA3 interface allows up to 6.0 Gb/s data transfer rate. If the eSATA3 port on the rear I/O has been connected, the internal SATA3_A4 will not function. SATA3_0 SATA3_A3 SATA3_A1 SATA3_1 SATA3_A4 SATA3_A2 Serial ATA (SATA) Data Cable (Optional) Either end of the SATA data cable can be connected to the SATA / SATA2 / SATA3 hard disk or the SATA2 / SATA3 connector on this motherboard. Serial ATA (SATA) Power Cable (Optional) connect to the SATA HDD power connector connect to the power supply Please connect the black end of SATA power cable to the power connector on each drive. Then connect the white end of SATA power cable to the power connector of the power supply. 48