Acer D241H User Manual - Page 12
INSTALLATION, Connect the Audio Cable to PC Analog Audio output Lime green connec
View all Acer D241H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2 HDMI Cable (Only HDMI-Input Model)(Optional) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. 2. Connect the Audio Cable to PC Analog Audio output (Lime green connector) (Only Audio-Input Model). 3. Connect the LAN Cable (LAN Cable is for Display+ only, no function in PC mode). 4. Connect the USB Cable to PC Host. 5. USB HUB: For USB Device connect. 6. Connect to the PC Microphone Audio Input (Pink connector). 7. Connect to the Earphone or External Speaker (Optional). 8. Card Reader for SD, MMC, MS, MS PRO and XD card. 9. Connect power cord: Connect the power cord to the monitor, then to a properly grounded AC outlet. 10.Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 11.If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. Speaker speaker speaker USB HUB 5 5 USB HUB 8 Card Reader LAN HUB 1X 2X 3X 4X 5X 3 4 2 1-1 1-2 6 9 7 9 67 1-2 1-1 5 2 3 4 EN-11