Acer PD120D PD120 User's Manual - EN - Page 11
Powering On/Off the Projector
View all Acer PD120D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation Powering On/Off the Projector Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will flash red. 3. Turn on the lamp by pressing "Power/Standby" button on the control panel.And the Power LED will turn blue. 4. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays "No Signal", please make sure the signal cables are securely connected. If you connect multiple sources at the same time, using the "Source" button on the remote control or control panel to switch. Turn on the projector first and then the signal sources. 1 Power/Standby 11 ... English
11
... English
Installation
Power/Standby
Powering On the Projector
1. Remove the lens cap.
2.
Ensure that the power cord and signal cable are securely
connected.
The Power LED will flash
red
.
3.
Turn on the lamp by pressing “Power/Standby” button on
the control panel.
And the Power LED will turn
blue
.
4. Turn on your source (computer, notebook, video player
,etc.).
The projector will detect your source automatically.
If the screen displays “No Signal”,
please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
“Source” button on the remote control or control panel to
switch.
Powering On/Off the Projector
Turn on the projector
first and then the signal
sources.
1