Acer TravelMate 210 TravelMate 210 User's Guide - Page 58

Error messages - cmos battery

Page 58 highlights

50 3 Troubleshooting my computer Error messages If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action. Error Messages CMOS Battery Bad CMOS Checksum Error Disk Boot Failure Diskette Drive Controller Error or No Controller Present Diskette Drive Error Diskette Drive Type Mismatch Equipment Configuration Error Hard Disk 0 Error Hard Disk 0 Extended Type Error I/O Parity Error Insert system diskette and press key to reboot Corrective Action Contact your dealer or an authorized service center. Contact your dealer or an authorized service center. Insert a system (bootable) diskette into the floppy drive (A:), then press Enter to reboot. Contact your dealer or an authorized service center. Contact your dealer or an authorized service center. Press F2 (during POST) to enter the BIOS Utility; then press Esc to exit and reconfigure the computer. Press F2 (during POST) to enter the BIOS Utility; then press Esc to exit and reconfigure the computer. Contact your dealer or an authorized service center. Contact your dealer or an authorized service center. Contact your dealer or an authorized service center. Insert a system (bootable) diskette into the floppy drive (A:), then press Enter to reboot.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79

3 Troubleshooting my computer
50
Error messages
If you receive an error message, note the message and take the
corrective action.
The following table lists the error messages in
alphabetical order together with the recommended course of action.
Error Messages
Corrective Action
CMOS Battery Bad
Contact your dealer or an authorized service
center.
CMOS Checksum Error
Contact your dealer or an authorized service
center.
Disk Boot Failure
Insert a system (bootable) diskette into the floppy
drive (A:), then press
Enter
to reboot.
Diskette Drive
Controller Error or No
Controller Present
Contact your dealer or an authorized service
center.
Diskette Drive Error
Contact your dealer or an authorized service
center.
Diskette Drive Type
Mismatch
Press
F2
(during POST) to enter the BIOS Utility;
then press
Esc
to exit and reconfigure the
computer.
Equipment
Configuration Error
Press
F2
(during POST) to enter the BIOS Utility;
then press
Esc
to exit and reconfigure the
computer.
Hard Disk 0 Error
Contact your dealer or an authorized service
center.
Hard Disk 0 Extended
Type Error
Contact your dealer or an authorized service
center.
I/O Parity Error
Contact your dealer or an authorized service
center.
Insert system diskette
and press <Enter> key
to reboot
Insert a system (bootable) diskette into the floppy
drive (A:), then press
Enter
to reboot.