Actiontec T2200H User Manual - Page 26
Apply, Connect, WPS AP PIN configuration.
View all Actiontec T2200H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
VDSL2/GigE Wireless 11n Gateway To set up WPS: 1. Enable WPS by clicking in the Enable radio button. 2. Click Apply to save your changes. 3. If connecting a device to the wireless network with a WPS AP PIN, write down the PIN displayed after Current WPS AP Pin, then enter the PIN in the device's WPS AP PIN configuration. 4. If connecting a device to the wireless network with PBC (Push Button Configuration), click Connect, then press the PBC-compatible button on the device within two minutes. 5. If the connecting device uses the End Device PIN method, enter the PIN in the appropriate text box, then enter in the device's End Device PIN configuration. 22
22
VDSL2/GigE Wireless 11n Gateway
To set up WPS:
1.
Enable WPS by clicking in the Enable radio button.
2.
Click
Apply
to save your changes.
3.
If connecting a device to the wireless network with a WPS AP PIN, write down
the PIN displayed after Current WPS AP Pin, then enter the PIN in the device’s
WPS AP PIN configuration.
4.
If connecting a device to the wireless network with PBC (Push Button
Configuration), click
Connect
, then press the PBC-compatible button on
the device within two minutes.
5.
If the connecting device uses the End Device PIN method, enter the PIN in the
appropriate text box, then enter in the device’s End Device PIN configuration.