Actiontec T2200H User Manual - Page 46
IPv6 LAN Settings, Apply
View all Actiontec T2200H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
VDSL2/GigE Wireless 11n Gateway 4. Select the IP type. If Single Static IP Address was selected, enter the IP address in the "Single Static IP" text box. If "Block of Static IP Addresses (Unnumbered Mode)" was selected, enter the designated gateway IP address and subnet mask address in the "Modem Address" and "Subnet Mask" text boxes, respectively. Also, "VIP Mode" can be activated by clicking in the appropriate check box. VIP mode works in concert with unnumbered mode and allows computers not assigned a static IP to receive a DHCP LAN side private IP address. 5. Select the DNS type. If static DNS address was selected, enter the primary DNS address and, optionally, the secondary DNS address in the appropriate text boxes. 6. If applicable, enter a different MTU value in the MTU text box. 7. Enable or disable IGMP proxy by clicking in the appropriate radio button. When finished in this screen, click Apply to activate any changes made. IPv6 LAN Settings IPv6 LAN Settings allows the user to configure the IPv6 LAN settings on the Gateway. To configure: 1. Click IPv6 LAN Settings from the menu on the left side of any Advanced Setup screen. The IPv6 screen appears. 2. Select the LAN connection type from the drop-down menu. 42