Actiontec T2200H User Manual - Page 49

IPv6 WAN Settings, Apply and Reboot, Enable, Apply

Get Actiontec T2200H PDF manuals and user guides View all Actiontec T2200H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Chapter 5 Advanced Setup 3. Click Apply and Reboot. The Gateway reboots with the new settings. To change the Gateway's DHCP settings: 1. Click Enable to activate the Gateway's DHCP server. 2. Enter the DHCP server's beginning IP address, ending IP address, and subnet mask address in the appropriate text boxes. 3. Enter the DHCP server's lease time period by entering the days, hours, and minutes in the appropriate text boxes. 4. Set the DNS values by selecting Dynamic or Static (clicking in the appropriate radio button), then, if needed enter the IP addresses for DNS server 1 and 2. 5. Click Apply to save your changes. IPv6 WAN Settings To set up the Gateway's IPv6 WAN settings: 1. Click IPv6 WAN Settings from the menu on the left side of any Advanced Setup screen. The IPv6 WAN Settings screen appears. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
45
Chapter 5
Advanced Setup
3.
Click
Apply and Reboot
. The Gateway reboots with the new settings.
To change the Gateway’s DHCP settings:
1.
Click
Enable
to activate the Gateway’s DHCP server.
2.
Enter the DHCP server’s beginning IP address, ending IP address, and subnet
mask address in the appropriate text boxes.
3.
Enter the DHCP server’s lease time period by entering the days, hours, and
minutes in the appropriate text boxes.
4.
Set the DNS values by selecting Dynamic or Static (clicking in the appropriate
radio button), then, if needed enter the IP addresses for DNS server 1 and 2.
5.
Click
Apply
to save your changes.
IPv6 WAN Settings
To set up the Gateway’s IPv6 WAN settings:
1.
Click
IPv6 WAN Settings
from the menu on the left side of any Advanced
Setup screen. The IPv6 WAN Settings screen appears.