Adaptec 2100S Quick Start Guide - Page 11
Run Storage Manager on ROM SMOR by pressing - raid controller
View all Adaptec 2100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Note: Adaptec SCSI RAID controllers must have at least one 32MB memory module installed. 4 Install the controller and storage devices in the appropriate enclosures. Attach all cables between the controller and the storage devices. 5 Run Storage Manager on ROM (SMOR) by pressing Ctrl+A during system boot. SMOR lets you configure the controller and verify proper hardware configuration. You can also use SMOR to configure your storage subsystem and disk arrays before installing the operating system. 6 Install the I2O driver for your operating system. You can also install Storage Manager Pro or Storage Manager on operating systems that support these applications. Storage Manager Pro and Storage Manager are included on the Adaptec CD. If you are using a Microsoft Windows operating system, they can be installed automatically by the Adaptec Autorun install utility. A version of Storage Manager Pro for NetWare and versions of Storage Manager for SCO UNIX and Linux are also included on the installation CD-ROM. Refer to Installing Adaptec Storage Management Software on page 32 for specific information. 10