Adaptec 2200200 Quick Installation Guide - Page 14
Installing the Enclosure, server cabinet may not look exactly the same as the one shown in
![]() |
View all Adaptec 2200200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Adaptec Storage Enclosure 335SAS ● 14 Installing the Enclosure 1 Turn off your server and disconnect the power cord. 2 Open the cabinet, following the manufacturer's instructions. 3 Discharge any static electricity build-up by touching a grounded metal object, such as the exposed metal parts on the back of your computer. 4 Install the enclosure, using the screws provided in the kit. (Your server cabinet may not look exactly the same as the one shown in the figure below.) 5 Continue with Connecting to a Controller on page 15.
![](/manual_guide/products/adaptec-2200200-quick-installation-guide-99035e3/14.png)
Adaptec Storage Enclosure 335SAS
●
14
Installing the Enclosure
1
Turn off your server and disconnect the power cord.
2
Open the cabinet, following the manufacturer’s instructions.
3
Discharge any static electricity build-up by touching a grounded
metal object, such as the exposed metal parts on the back of your
computer.
4
Install the enclosure, using the screws provided in the kit. (Your
server cabinet may not look exactly the same as the one shown in the
figure below.)
5
Continue with
Connecting to a Controller
on page 15
.