Adaptec 2200200 Quick Installation Guide - Page 16
Connecting Two Enclosures to a SATA Controller, Completing the Connections
![]() |
View all Adaptec 2200200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Adaptec Storage Enclosure 335SAS ● 16 Connecting Two Enclosures to a SATA Controller Note: This procedure is for SATA controllers that support more than 4 disk drives. Using 2-internal SATA fan-out cables, connect each enclosure to the SATA ports on the controller. AAR-2820SA 0 12 3 4 5 6 7 Note: If you are connecting two enclosures to your controller, ensure that you select a different I2C address for each enclosure. This can be done by populating the 3-pin jumper J43 differently for both enclosures. (See jumper location on page 9.) Continue with Completing the Connections on page 18.
![](/manual_guide/products/adaptec-2200200-quick-installation-guide-99035e3/16.png)
Adaptec Storage Enclosure 335SAS
●
16
Connecting Two Enclosures to a SATA Controller
Note:
This procedure is for SATA controllers that support more than 4
disk drives.
Using 2-internal SATA fan-out cables, connect each enclosure to the
SATA ports on the controller.
Note:
If you are connecting two enclosures to your controller, ensure
that you select a different I2C address for each enclosure. This can be
done by populating the 3-pin jumper J43 differently for both
enclosures. (See jumper location on
page 9
.)
Continue with
Completing the Connections
on page 18
.
3
2
1
0
4
5
6
7
AAR-2820SA