Adaptec AHA-2940U2 User Guide - Page 6

STEP 3 Plug the remaining connectors to your internal Ultra2 SCSI peripherals. Ultra2 SCSI Peripherals (Ultra2-LVD/SE) Built-in Terminator on Cable NOTE Internal Ultra2 SCSI peripherals come from the factory with termination disabled and cannot be changed. Proper termination is provided by the built-in terminator at the end of the Ultra2 internal SCSI cable provided in the kit. STEP 1 68-pin Internal Wide Ultra SCSI Connector Use the 68-pin internal Wide Ultra SCSI connector to connect internal Fast/Wide Ultra SCSI peripherals that have 68-pin connectors. Do not connect Ultra2 peripherals to this connector. The 68-pin internal Ultra SCSI cable included in the kit allows you to to connect up to two Fast/Wide Ultra peripherals. If you have more than two Fast/Wide Ultra peripherals, you will need to obtain a 68-pin cable with enough connectors to accommodate all of your Fast/Wide Ultra peripherals. Follow these steps to connect your internal Fast/Wide Ultra peripherals. Locate the 68-pin internal Ultra SCSI cable in the package. Connect to Fast/Wide Ultra Peripheral (Terminated) Connect to SCSI Card 2940U2W Connect to Fast/Wide Ultra Peripheral (Not Terminated) 6