Adaptec AHA-2940U2 User Guide - Page 7
pin Internal Ultra SCSI Connector
View all Adaptec AHA-2940U2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
STEP 2 Plug the long end of the cable to the 68-pin internal Ultra SCSI connector on the SCSI Card 2940U2W. 68-pin Internal Wide Ultra SCSI Cable 68-pin Internal Wide Ultra SCSI Connector STEP 3 STEP 4 Plug the other end of the cable to a terminated Fast/Wide Ultra SCSI peripheral. To connect a second Fast/Wide Ultra SCSI peripheral, plug the middle connector of the cable to the peripheral. The peripheral must not be terminated. Unterminated SCSI Peripheral Terminated SCSI Peripheral STEP 1 50-pin Internal Ultra SCSI Connector Use the 50-pin internal Ultra SCSI connector to connect internal or external Fast/Ultra Narrow SCSI peripherals that have standard 50-pin connectors. Internal Fast/Ultra Narrow SCSI Peripherals The 50-pin internal cable included in the kit allows you to connect up to two standard internal SCSI peripherals. If you have more than two standard internal 50-pin peripherals, you will need to obtain a 50-pin cable with enough connectors to accommodate all of your standard peripherals. Follow these steps to connect your standard internal Fast/Ultra Narrow peripherals: Locate the 50-pin internal Ultra SCSI cable in the package. Connect to SCSI Card 2940U2W Connect to Fast/Ultra Narrow Peripheral (Terminated) Connect to Fast/Ultra Narrow Peripheral (Not terminated) (Continued on the other side) 7