Adaptec FC2101CDR2-AC Installation Guide - Page 20
Disk Drive Carrier, Power Supplies, cross- al area not less than 4mm
![]() |
UPC - 760884144909
View all Adaptec FC2101CDR2-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
20 • Downward compatible to 1GB. • Dense enclosure with 14 drives in a 3U form factor. • Scalable to 8.2TB (112 drives), support for 15K rpm drives. • Enhanced enclosure services (SES) monitoring and reporting. • No single point of failure, with redundant, hot-swappable components. • Intuitive, comprehensive management with Spheras Storage Manager. • User installable, configurable and on-line maintainable. • Industry-standard 19-inch rackmount or deskside configuration. • Dual AC power supplies. Disk Drive Carrier The disk drive carrier supports one inch, SCA-2 direct attach disk drives. The 2Gb SANbloc Series can hold up to fourteen disk drive carriers. The disk drives can be hot swapped and the disk drive carriers provide for blind mating. Power Supplies The 2Gb SANbloc Series uses two AC power supplies for normal operation, providing redundancy of the power system. The power supplies can be hot swapped. The AC power supplies provide 673 Watts continuous output power and 853 Watts peak output power. The power supplies provide active current sharing, power factor correction, over current and over voltage protection is also provided. The power supplies have individual power inputs. CAUTION: Power supply cords shall have conductors with a cross-sectional area not less than 4mm2. This cross-sectional area corresponds to a minimum 10AWG wire. Features
![](/manual_guide/products/adaptec-lsmfc2002-installation-guide-2354386/20.png)