Adaptec FC2101CDR2-AC Installation Guide - Page 33
Gb Operation, Location of Jumpers on LS Module
![]() |
UPC - 760884144909
View all Adaptec FC2101CDR2-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
33 1Gb Operation To set the fibre channel loop speed to 1Gb operation: 1 Remove the LS module from the front of the enclosure. 2 On the LS Module locate the jumper position JP2 (Figure 2-1). 3 For 1Gb operation there should be no jumper installed at JP2. If one is installed, remove it. 4 Replace the LS module. Figure 2-1 Location of Jumpers on LS Module Setting Fibre Channel Loop Speed (2Gb or 1Gb)
![](/manual_guide/products/adaptec-lsmfc2002-installation-guide-2354386/33.png)
Setting Fibre Channel Loop Speed (2Gb or 1Gb)
33
1Gb Operation
To set the fibre channel loop speed to 1Gb operation:
1
Remove the LS module from the front of the enclosure.
2
On the LS Module locate the jumper position JP2 (Figure 2-1).
3
For 1Gb operation there should be no jumper installed at JP2. If
one is installed, remove it.
4
Replace the LS module.
Figure 2-1
Location of Jumpers on LS Module