Adaptec FC2101CDR2-AC Installation Guide - Page 73
RAID Controller LEDs, Table 5-3, Controller Status LEDs
![]() |
UPC - 760884144909
View all Adaptec FC2101CDR2-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
73 RAID Controller LEDs The RAID controller has 7 LEDs located and numbered as shown. Figure 5-5 RAID controller LEDs 1 2 3 Status LEDs 4 5 6 7 FC Host Connectors (SSF optical) RS232 HSSDC Connector Ethernet Connection The table below describes the LEDs meaning. Table 5-3 Controller Status LEDs LED Description 1 Yellow - Not Ready. Normally Off. Goes On during power up sequence. 2 Green - Ready. Normally On 3 Green - Dirty Cache. On when there is data in cache. 4 Yellow - BBU Fault. Normally Off. 5 Green - Partner Fail. Normally Off 6 Green - Device Activity i.e. on drive channels. Flashes with activity. 7 Green - Host Activity. Flashes with activity. RAID Controller LEDs
![](/manual_guide/products/adaptec-lsmfc2002-installation-guide-2354386/73.png)
RAID Controller LEDs
73
RAID Controller LEDs
The RAID controller has 7 LEDs located and numbered as
shown.
Figure 5-5
RAID controller LEDs
The table below describes the LEDs meaning.
Table 5-3
Controller Status LEDs
LED
Description
1
Yellow - Not Ready. Normally Off. Goes On during
power up sequence.
2
Green - Ready. Normally On
3
Green - Dirty Cache. On when there is data in cache.
4
Yellow - BBU Fault. Normally Off.
5
Green - Partner Fail. Normally Off
6
Green - Device Activity i.e. on drive channels. Flashes
with activity.
7
Green - Host Activity. Flashes with activity.
1
2
3
4
5
6
7
FC Host Connectors (SSF optical)
HSSDC Connector
Ethernet Connection
RS232
Status LEDs