Alesis MultiMix 12R Reference Manual - Page 18

Microphone Inputs - rack mixer

Get Alesis MultiMix 12R PDF manuals and user guides View all Alesis MultiMix 12R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Connections Microphone Inputs The Alesis Multimix 12R features eight studio-grade, low-noise hybrid microphone preamplifiers. These [MIC] jacks are designed to work with almost any low-impedance microphone using standard 3conductor XLR connectors. The [MIC] jacks also feature 48 volt phantom power, which may be turned on and off by the [PHANTOM] switch on the back panel, for condenser microphones which require external powering. Balanced Mic Input 2 1 Hot 3 Ground Cold Socket (female) The MIC Input is designed to accept a wide range of balanced or unbalanced low impedance input signals, with up to 60 dB of amplification available (which is 10 to 20 dB more than many other rack-mount mixers). It is wired with "pin 2 hot" according to the accepted standard. ✪ Use only one input per channel. The LINE IN jack and the MIC IN jack of a channel can't be used at the same time. If you turn up the level of a line source to hear it at the same time a microphone is connected, you may damage the microphone.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Connections
Microphone Inputs
The Alesis Multimix 12R features eight studio-grade, low-noise hybrid
microphone preamplifiers.
These [MIC] jacks are designed to work
with almost any low-impedance microphone using standard 3-
conductor XLR connectors.
The [MIC] jacks also feature 48 volt
phantom power, which may be turned on and off by the [PHANTOM]
switch on the back panel, for condenser microphones which require
external powering.
Balanced Mic Input
Ground
Hot
1
2
3
Cold
Socket (female)
The MIC Input is designed to accept a wide range of balanced or
unbalanced low impedance input signals, with up to 60 dB of
amplification available (which is 10 to 20 dB more than many other
rack-mount mixers).
It is wired with "pin 2 hot" according to the
accepted standard.
✪
Use only one input per channel.
The LINE IN jack and the MIC IN
jack of a channel can’t be used at the same time.
If you turn up the
level of a line source to hear it at the same time a microphone is
connected, you may damage the microphone.