Alesis MultiMix 12R Reference Manual - Page 23

Phonograph turntables, Do not connect any of the following to any, input of the Multimix 12R

Get Alesis MultiMix 12R PDF manuals and user guides View all Alesis MultiMix 12R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Connections Phonograph turntables If you're using a record turntable, you may not plug it directly into the line inputs of the Multimix 12R (well, you can, but it will sound very thin and noisy). Obtain a phono preamp from your dealer or an electronics specialty store. 1. Plug the outputs of the phonograph pickup into the RIAAequalized phono preamp. 2. Plug the outputs of the preamp into the LINE IN 9-10 or 11-12 inputs of the Multimix 12R. Do not connect any of the following to any input of the Multimix 12R! • The speaker output of any power amplifier. • Any source that is too loud for the input (no more than 3 volts RMS into a [MIC] jack or 13 volts RMS into a [LINE IN] jack). • Any unshielded cable. Multimix 12R Reference Manual 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Connections
Multimix 12R Reference Manual
13
Phonograph turntables
If you're using a record turntable, you may not plug it directly into the
line inputs of the Multimix 12R (well, you can, but it will sound very
thin and noisy).
Obtain a phono preamp from your dealer or an
electronics specialty store.
1.
Plug the outputs of the phonograph pickup into the RIAA-
equalized phono preamp.
2.
Plug the outputs of the preamp into the LINE IN 9-10 or 11-12
inputs of the Multimix 12R.
Do not connect any of the following to any
input of the Multimix 12R!
•
The speaker output of any power amplifier.
•
Any source that is too loud for the input (no more than 3 volts RMS
into a [MIC] jack or 13 volts RMS into a [LINE IN] jack).
•
Any unshielded cable.