Alesis PA System in a Box Bundle PA System in a Box Bundle - User Guide - v1.3 - Page 3

Setup Important: Connect cables with all equipment powered off, and ensure that all volume controls are turned down. To setup the mixer and speakers: 1. Position the mixer in the middle of the speakers, with enough distance between the speakers for maximum stereo separation. 2. Plug the speaker cables into the left and right Speaker Outputs on the back of the mixer. 3. Set all channel Level knobs to their minimum positions, set the Master Level knob to zero, and set EQs flat. 4. Connect your mic or instrument to the channel. 5. Set the Master Level knob to no more than 70%. 6. Connect the mixer's power cable to a power outlet, and set the power switch to On. 7. Adjust the channel Level knob to reach the desired level without distortion. To set up a mic or instrument on another channel, repeat Steps 4-7. Installation Tips • Place the speakers in a position that allows for unobstructed sound projection. In many instances, it is beneficial to place speakers on tripod stands at a suitable height in order to achieve maximum dispersion and reach. • Avoid pointing the microphone directly at the speaker. This can cause feedback or damage speaker components as well as your hearing. Cleaning When necessary, use compressed air or a dry cloth to keep the mixer clean and dust-free. Do not use any solvents such as benzol or alcohol. Connection Diagram Items not listed in Introduction > Box Contents are sold separately. Microphone Guitar Drum Machine USB Flash Drive Power Passive Speakers (included) 3