Alesis TA Drummer Wireless User Guide - Page 4

Diagram and Parts Description 1. Power In (IEC): Use the included power cable to connect TransActive Drummer Wireless to a power outlet. While the power is switched off, plug the power cable into the TransActive Drummer Wireless first, then plug the cable into a power outlet. * WARNING: U.S. users should set this switch to "100-120V" whereas U.K. and most European users should set this to "220-240V." Selecting the improper voltage can damage the unit. 2. Voltage Selector*: Set this to the correct voltage for your country/region. 3. Power On/Off Switch: Powers TransActive Drummer Wireless on or off. 4. Auxiliary Input: This stereo RCA input can be used to connect a CD player or other audio source. 5. Line Input: Connect your external sound sources to these inputs. Each input can accept a 1/4" connection. This allows for several connection options (e.g., 1 stereo source such as a drum module, CD player, or sampler, 2 microphones, 1 or 2 mono sources). 45 8 6 7 2 3 1 13 DEVICE CHARGE 14 6. Master Output: Connect a mixer, PA system, or other 9 10 11 12 device to these outputs using 1/4" cables. Adjust the level of these outputs with the MASTER VOLUME knob on the top panel. 7. Stereo Link Output: Connect a 1/4" stereo (TRS) cable to this line-level output to connect another amplification device, such as another TransActive Drummer Wireless. When you connect this output to another TransActive Drummer Wireless, you will be able to use the inputs of both TransActive Drummer Wirelesss simultaneously with a full stereo image and the combined wattage of 200 W. 8. Stereo Link Selector: When using two connected TransActive Drummer Wirelesss, set one speaker's Stereo Link Selector to the "left" and the other to the "right" for a full stereo image. When in the "Off" position, the summed left and right channels will be heard out of that speaker. 9. Headphones: Connect your 1/4" headphones to this output. 10. Master Volume Control: Adjusts the volume of the TransActive Drummer Wireless, the MASTER OUTPUT on the rear panel and the HEADPHONE OUTPUT on the top panel. This master output includes Bluetooth playback plus any other devices connected to the INPUTS on the rear panel. 11. EQ: Use these knobs to adjust the levels of the Treble, Mid, and Bass frequencies. 12. Wireless/Aux Volume: This knob controls the level of the paired Bluetooth device and the Wireless/Auxiliary Input. 13. USB Device Charge: Connect your device's charge cable here to charge it. USB charging only functions when Transactive Drummer Wireless is powered on. Note: Users with iPad (3rd generation or later) may experience slower charging. We recommend charging with the screen locked when using iPad (3rd generation or later). 14. Bluetooth: Press the Pair/Unpair button to Pair to a Bluetooth device. The Paired LED will be lit when a device is paired to TransActive Drummer Wireless. This LED will not be lit when TransActive Drummer Wireless is first powered on (unless it was previously paired with a device). Press the Pair/Unpair button to disconnect a paired Bluetooth device. 4