Alpine 7893 Owners Manual - Page 16

SETUP Operation SOURCE BAND MODE/Rotary encoder g DN f UP SETUP Switching the Tuner Mode The CDA-7995/CDA-7894/CDA-7893/CDA-7892 incorporates the MAX TUNE SQ for the highest quality tuner audio. Moreover, you can choose between two settings to suit your own personal sound preferences and usage. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP or g DN button to select "NORMAL or HI-FI." 3 Press the BAND button to switch the TUNER mode. HI-FI ←→ NORMAL NORMAL: Standard setting HI-FI: Sound quality priority setting NOTES • The initial setting at the factory is "NORMAL." • If you find the sound is very noisy while listening to the tuner in the HI-FI mode, we recommend you change to the NORMAL mode. 4 When the setting is completed, press the SETUP button to return to the normal mode. NOTE "MP3 File Selection" and "Playing MP3 data" in the "SETUP" mode section are described in MP3 Operation on page 26. Changing Lighting Color (CDA-7894 only) 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP or g DN button to select "AMBER". 3 Press the BAND button to toggle the mode between AMBER ON (amber) and AMBER OFF (green). 4 Press the SETUP button to set the selected mode. Dimmer Control (CDA-7995/CDA-7894/CDA-7893 only) Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP or g DN button to select "DIM"(DIMMER). 3 Press the BAND button to select the Dimmer mode. Each press toggles between DIM AUTO and DIM MANUAL. 4 Press the SETUP button to activate the normal mode. Subwoofer On and Off 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP or g DN button to select "SUB (Subwoofer)." 3 Press the BAND button to toggle mode between SUB W ON and SUB-W OFF (CDA-7892: SUB W OFF). NOTE The initial setting at the factory is subwoofer ON. 4 Press the SETUP button after setting the SUB-W ON. 5 Press the MODE button repeatedly to select the SUB-W mode. → SUB-W → BALANCE VOLUME ← DEFEAT ← FADER ← Press the g DN or f UP button after selecting the SUB-W mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°). 6 Turn Rotary encoder until the desired sound is obtained in each mode. 14-EN