Alpine 7893 Owners Manual - Page 25
Multi-Changer Selection - remote
View all Alpine 7893 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Multi-Changer Selection Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX). 1 Press the SOURCE button on the CDA-7995/CDA- 7894/CDA-7893/CDA-7892 to activate the CD Changer mode. Alternatively, press the SOURCE button on the Remote Control (RUE-4187) to activate the CD Changer mode. 3 The CD Changer Selection mode remains active for 8 seconds after step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display. NOTE If the selected CD Changer is not connected, the display will show "NO CHGR ." Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display. 4 To operate the selected changer, see "CD Player Operation" section. NOTE For further details about the external input (AUX) when using KCA-410C, see "Setting the AUX Mode (V-Link)" on page 15. SOURCE BAND 2 Press the BAND button on the CDA-7995/CDA-7894/ CDA-7893/CDA-7892 or the RUE-4187 to activate the CD Changer Selection mode. 23-EN