Alpine 7893 Owners Manual - Page 8

Basic Operation g DN BAND MODE (Rotary encoder) f UP X-OVER CENTER f CLK MUTE Adjusting Volume/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat 1 Press the MODE (Rotary encoder) button repeatedly to choose the desired mode. Each press changes the modes as follows: → BALANCE → FADER → DEFEAT SUBWOOFER*← VOLUME ← Volume : 0 ~ 35 Balance : L15 ~ R15 Fader: R15 ~ F15 Subwoofer: 0 ~ +15 NOTES • If the MODE button is not pressed within 5 seconds after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to the VOLUME mode. • *When the subwoofer mode is OFF, its level cannot be adjusted. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted settings of BASS, TREBLE will return to the factory defaults, but MX will be turned off. NOTE Depending on the connected devices, some functions and display indications do not work. Audio Mute Function Displaying Time 1 Press the CLK (clock) button repeatedly until the time is displayed. Each press changes the modes as follows: Radio mode → Radio frequency → Clock priority → mode TITLE mode CD Player/Changer modes → Playing time mode → Clock priority mode → DISC TEXT mode * TITLE mode ← TRACK TEXT mode * ← NOTES • Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. • When the power is off but the ignition key is on, press the CLK button to display the time. •∗ For CDA-7893/CDA-7892 models, the display above is shown with a CD-TEXT compatible changer connected. Setting Time 1 In the Clock priority mode, press and hold the CLK (clock) button for at least 3 seconds while the time is displayed. The time indication will blink. 2 Turn the Rotary encoder to adjust the hours while the time indication is blinking. 3 When the hour has been adjusted, press the Rotary encoder. 4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder. Activating this function will instantly lower the volume level by 20 dB. 1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB. Pressing the MUTE button again will bring the audio back to its previous level. 6-EN