Alpine 9831 Owners Manual - Page 23

Amplifier

Get Alpine 9831 - CDA Radio / CD PDF manuals and user guides View all Alpine 9831 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Setting an Amplifier Link (CDA-9831 only) With an external Amplifier Link compatible amplifier MRD-M501 or MRD-M301 is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 external amplifiers can be adjusted. 1 Press and hold MENU for at least 2 seconds. 2 Press MENU to select A-Link. 3 Press IN or I04, 1 to select AMP-ID (AMP1 to 8), or BASS VOLUME. To set the BASS VOLUME 4 Turn the Rotary encoder to adjust the level. 5 When the adjustment has been completed, press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. To set the Amplifier 4 Press BAND/TEL. to select from the following setting items to be adjusted. INPUT LOW PASS SUBSONIC P-EQ BASS COMP TCR -s PHASE TURN ON DELAY-s OUTPUT DISABLE (SAFE) INPUT 5 Turn the Rotary encoder to change the settings. 6 Press the Rotary encoder if there are other settings to be changed. Repeat steps 5 and 6 (above). 7 Repeat steps 4 to 6 (above) if other items need to be adjusted. To set another amplifier, return to the step 3. To store the adjusted contents 1) While adjusting the mode, press and hold either button (1 or 2) for at least 2 seconds. The adjusted contents are stored. To recall adjusted and stored contents 1) While adjusting the mode, press either button (1 or 2). The adjusted and stored contents are recalled. 8 When adjustment has been completed, press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. To easily recall adjusted and stored contents 1) Press MENU to select A-Link. 2) Press IN or 10401 to select AMP 1 to 8. 3) Turn the Rotary encoder to select Preset 1 or Preset 2. 4) Press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. • For details of each of the settings, refer to the Owner's Manual of the external amplifier • If amplifier settings are made on the CDA-9831 model, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the CDA-9831 model. • "No Link" is displayed if the amplifier is removed or its power cannot be turned on, etc. • If multiple amplifiers are connected to this unit, set a different ID on each amplifier. Otherwise the display mayflicker. Displaying the External Amplifier Information (CDA-9831 only) When an external Amplifier Link compatible amplifier is connected, the external amplifier's information (voltage, electric current, temperature) can be shown in the display of the head unit. e 1 Press TITLE in the Radio or CD mode to switch the display of the external amplifier information. • For switching the display, refer to the section "Displaying the Title/ Text" (page 19). • For changing the XM display, refer to the section "Changing the Display (page 27). Voltage Display vA,M7P5.0•F 12•4V 25.6A Temperature Display Electric current Display - This indicator is lit when the Amplifier Link is set. This indicator is lit when external amplifier information is displayed. • To switch the display between Celsius and Fahrenheit, refer to page 25. 21 -EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Setting
an
Amplifier
Link
(CDA-9831
only)
With
an
external
Amplifier
Link
compatible
amplifier
MRD-M501
or
MRD-M301
is
connected, the
amplifier
settings
are
adjustable
from
the
head
unit.
A
maximum
of
8
external
amplifiers
can
be
adjusted.
1
Press
and
hold
MENU
for
at
least
2
seconds.
2
Press
MENU
to
select
A
-Link.
3
Press
IN
or
I04
,
1
to
select
AMP
-ID
(AMP1
to
8),
or
BASS
VOLUME.
To
set
the
BASS
VOLUME
4
5
Turn
the
Rotary
encoder
to
adjust
the
level.
When
the
adjustment
has
been
completed,
press
MENU
to
select
RETURN.
The
unit
returns
to
normal
mode.
Pressing
and
holding
MENU
for
at
least
2
seconds
will
return
to
normal
mode.
To
set
the
Amplifier
4
5
6
7
Press
BAND/TEL.
to
select
from
the
following
setting
items
to
be
adjusted.
INPUT
LOW
PASS
SUBSONIC
P-EQ
BASS
COMP
TCR
-s
PHASE
TURN
ON
DELAY
-s
OUTPUT
DISABLE
(SAFE)
INPUT
Turn
the
Rotary
encoder
to
change
the
settings.
Press
the
Rotary
encoder
if
there
are
other
settings
to
be
changed.
Repeat
steps
5
and
6
(above).
Repeat
steps
4
to
6
(above)
if
other
items
need
to
be
adjusted.
To
set
another
amplifier,
return
to
the
step
3.
To
store
the
adjusted
contents
1)
While
adjusting
the
mode,
press
and
hold
either
button
(1
or
2)
for
at
least
2
seconds.
The
adjusted
contents
are
stored.
To
recall
adjusted
and
stored
contents
1)
While
adjusting
the
mode,
press
either
button
(1
or
2).
The
adjusted
and
stored
contents
are
recalled.
8
When
adjustment
has
been
completed,
press
MENU
to
select
RETURN.
The
unit
returns
to
normal
mode.
Pressing
and
holding
MENU
for
at
least
2
seconds
will
return
to
normal
mode.
To
easily
recall
adjusted
and
stored
contents
1)
Press
MENU
to
select
A
-Link.
2)
Press
IN
or
10401
to
select
AMP
1
to
8.
3)
Turn
the
Rotary
encoder
to
select
Preset
1
or
Preset
2.
4)
Press
MENU
to
select
RETURN.
The
unit
returns
to
normal
mode.
Pressing
and
holding
MENU
for
at
least
2
seconds
will
return
to
normal
mode.
•
For
details
of
each
of
the
settings,
refer
to
the
Owner's
Manual
of
the
external
amplifier
•
If
amplifier
settings
are
made
on
the
CDA-9831
model,
do
not
then
change
the
setting
with
the
amplifier
buttons
as
the
amplifier
display
may
not
match
the
operations
of
the
CDA-9831
model.
•
"No
Link"
is
displayed
if
the
amplifier
is
removed
or
its
power
cannot
be
turned
on,
etc.
•
If
multiple
amplifiers
are
connected
to
this
unit,
set
a
different
ID
on
each
amplifier.
Otherwise
the
display
may
fl
icker.
Displaying
the
External
Amplifier
Information
(CDA-9831
only)
When
an
external
Amplifier
Link
compatible
amplifier
is
connected,
the
external
amplifier's
information
(voltage,
electric
current,
temperature)
can
be
shown
in
the
display
of
the
head
unit.
1
Press
TITLE
e
in
the
Radio
or
CD
mode
to
switch
the
display
of
the
external
amplifier
information.
•
For
switching
the
display,
refer
to
the
section
"Displaying
the
Title/
Text"
(page
19).
•
For
changing
the
XM
display,
refer
to
the
section
"Changing
the
Display
(page
27).
Voltage
Display
AMP
12• 4V
25.6A
v,75.0•F
Temperature
Display
Electric
current
Display
—
This
indicator
is
lit
when
the
Amplifier
Link
is
set.
This
indicator
is
lit
when
external
amplifier
information
is
displayed.
•
To
switch
the
display
between
Celsius
and
Fahrenheit,
refer
to
page
25.
21
-EN