Alpine CDA-9847 Owners Manual - Page 19
SAT Radio Receiver Optional - sale
View all Alpine CDA-9847 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
POWER IC ON : The speakers are driven by the built-in amplifier. SPEAKER RIGHT FRONT Speakers Front right SPEAKER RIGHT REAR Rear right SAT Radio Receiver (Optional) SOURCE/ POWER BAND 8 SEARCH/ Q.S. SPEAKER LEFT REAR Rear left SPEAKER LEFT FRONT Front left • No sound is produced by the system when the power output is set to OFF. Setting the External Digital Input D-AUX ON / D-AUX OFF (Initial setting) When an ALPINE Ai-NET compatible digital audio processor and an Ai-NET non-compatible DVD player (DVE-5207) are connected, set D-AUX to ON to enjoy 5.1-channel surround sound. • After setting D-AUX to ON, make the setting in "Connecting an Optical Digital Compatible Audio Processor and an Ai-NET NonCompatible DVD Player." • Press SOURCE/POWER, and select the D-AUX mode, and adjust the volume, etc. • Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF. Connecting an Optical Digital Compatible Audio Processor and an Ai-NET Non-Compatible DVD Player H510 /OTHER (Initial setting) After setting D-AUX to ON in "Setting the External Digital Input," do the following according to the audio processor type: H510: If the PXA-H510 and the Ai-NET non-compatible DVD player (DVE-5207) are connected (using optical cable), use the H510 setting. Connect the DVD player (using optical cable) to the optical digital input terminal (for DVD Player). OTHER: If an audio processor other than PXA-H510 and the Ai-NET non-compatible DVD player (DVE-5207) are connected (using optical cable), use the OTHER setting. Connect the DVD player (using optical cable) to the optical digital input terminal (for Head unit). • After input selection is completed, turn the ignition off and back on again. Setting of the optical digital input switch is completed. g f Rotary 9 F/SETUP Preset buttons TITLE encoder (1 through 6) SAT Receiver: XM or SIRIUS Receiver When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time. Receiving Channels with the SAT Radio Receiver (Optional) About SAT Radio Satellite Radio* is the next generation of audio entertainment, with over to 100 digital channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM's website at www.xmradio.com., and SIRIUS' website at www.sirius.com. To receive XM radio, the XM company sold XMDirect™ and ALPINE Interface Adapter Box (for sale in the near future) will be required. For details, consult you nearest ALPINE dealer. * XM and its corresponding logos are trademarks of XM Satellite Radio Inc. * SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc. • The SAT Receiver controls on the CDA-9847 are operative only when an SAT Receiver is connected. 1 Press SOURCE/POWER to select XM or SIRIUS mode. 2 Press BAND to select the desired band. Each press changes the band: XM mode: XM1 → XM2 → XM3 → XM1 SIRIUS mode: SR1 → SR2 → SR3 → SR1 3 Press 8 or 9 to select desired category. 4 Press g or f to select the desired channel. Holding down g or f will change channels continuously. 18-EN