Alpine CDA-9847 Owners Manual - Page 30
Installation
View all Alpine CDA-9847 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Installation 1 No Pressure Here Mounting Sleeve (Included) Dashboard No Pressure Here This unit 3 Slide the CDA-9847 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel. Removal 1 Remove the DETACHABLE FRONT PANEL. 2 Insert the optional brackets into the back, along the guides on either side of the unit. The unit can now be removed from the mounting sleeve. This unit Bracket (Included) Remove the Detachable Front Panel (refer to page 7). Slide mounting sleeve from main unit. (see "Removal" on this page). Slide the mounting sleeve into the dashboard. NOTE Please examine the installation. Make certain that no external pressure is applied to either the top of the unit or the removable nosepiece. 2 Hex Nut (M5) Screw ∗∗ Bolt Stud Metal Mounting Strap ∗ Ground Lead Chassis This unit Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis. NOTE ** For the screw marked , use an appropriate screw for the chosen mounting location. Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9847. Connect all other leads of the CDA-9847 according to details described in the CONNECTlONS section. 3 Pull the unit out, keeping it unlocked as you do so. Face Plate This unit Ground Lead ∗ Screws (M5 × 8) (Included) Mounting Bracket NOTE Secure the ground lead of the unit to a clean metal spot using a screw (∗) already attached to the vehicle's chassis. 29-EN