Alpine INE-W970HD Owners Manual - Page 12

Getting Started Components and Features INE-W970HD ⑦ ⑧ ① ⑨ ② ③ ④ ⑤ ⑥ 〇① Sound Settings or Eject button Displays the Tone/Fader/Balance settings screen. Press and hold this button to eject Disc. 〇② VOICE button Depending on the connected smartphone, press to call Siri function or voice recognition mode. 〇③ NAV button From an Audio system screen, press this button to recall the the last screen of the Navigation System. Press again to switch to Navigation menu screen. Press and hold this button for at least 2 seconds to change to Go Home route screen. (If Home is not set yet, it will change to the Home setting screen.) For details of navigation operations, refer to "Navigation System OM (Owner's Manual)". Recalls the connected smartphone's map screen. Depending on the smartphone, this function may not be available. 〇④ ALL MENUS or (Power Off) button Recalls the All Menus screen. Press and hold this button for at least 2 seconds to turn the power off. 〇⑤ (AUDIO) or (MUTE) button Displays the Audio/Visual screen. When pressed and held, mutes the volume. button Press to adjust the volume. 〇⑦ Remote Sensor Point the remote control transmitter towards the remote sensor within a range of 2 meters. 〇⑧ Disc insert slot Inserts/ejects discs 〇⑨ RESET switch The system of this unit is reset. About the button descriptions used in this Owner's Manual The buttons found on the face of the unit are expressed in bold (e.g. MENU). The buttons found on the touch-screen display are shown in bold within brackets, [ ] (e.g. [×]). Turning Power On/Off Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake before attempting these operations. 1 Turn the ignition key to the ACC or ON position. The system turns on. • When turned on, the system displays the last screen that was displayed before the ignition key was turned off. For example, if the unit is in radio mode when ignition is turned off, it will remain in radio mode when ignition is turned back on. 2 Press and hold the ALL MENUS/(Power Off) button for more than 2 seconds to turn the power off. • The unit can be turned on by pressing any button. • The unit is a precision device. Careful handling of the unit should provide you with years of trouble-free operation. Turning the System On With the Alpine system, the home screen is displayed automatically when the ignition key is turned to ACC or ON. When the system is used for the first time, the language selection menu is displayed. Swipe the Language list screen vertically, then touch your choice from the list of 3 languages. • Some of this unit's functions cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake before attempting these operations. 12-EN