Alpine INE-W970HD Owners Manual - Page 185

Getting Started Owner's manual Location of Controls The screen design used in the Owner's Manual may differ from the actual screen. ■■ For INE-W970HD ⑦ ⑧ ⑤ ⑥ Getting Started ⑨ 〇① Sound Settings or Eject button Displays the [Tone/Fader/Balance] settings screen. Press and hold this button to eject Disc. 〇② or VOICE button Depending on the connected smartphone, press to activate Siri function or voice recognition mode. (Only works for Apple CarPlay and Android Auto.) 〇③ (NAV) button Recalls the navigation map screen. Press again to switch to Navigation menu screen. Press and hold this button for at least 2 seconds to change to Go Home route screen. (If Home is not set yet, it will change to the Home setting screen.) For details of navigation operations, refer to "Navigation System OM (Owner's Manual)". Recalls the connected smartphone's map screen. Depending on the smartphone, this function may not be available. 〇④ ALL MENUS or (Power Off) button Recalls the All Menus screen. Press and hold this button for at least 2 seconds to turn the power off. 〇⑤ (AUDIO) or (MUTE) button Displays the Audio/Visual screen. When pressed and held, mutes the volume. button Press to adjust the volume. 〇⑦ Remote Sensor Point the remote control transmitter towards the remote sensor within a range of 2 metres. 〇⑧ Disc insert slot Inserts/ejects discs 〇⑨ RESET switch The system of this unit is reset. Turning Power On/Off Some of this unit's functions cannot be performed while the is vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake then release and apply and keep applied before attempting these operations. 1 Turn the ignition key to the ACC or ON position. The system turns on. 2 Press and hold the All Menus/ (Power Off) button for more than 2 seconds to turn the power off. 6 -EN ALPINE_QRG_AM_ENG_191027.indd 6 2019-10-27 오후 9:33:37