Alpine PXE-X09 Owners Manual - Page 17
Front Sound Field Stereo 2CH
View all Alpine PXE-X09 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Software for PC c. Select "Input link settings" to set the function to be tuned. There are five options: Channel EQ, X-Over, Channel phase, Channel volume, and Channel mute. d. Select "Output link settings" to set the function to be tuned. There are six options: Channel EQ, X-Over, Channel delay, Channel phase, Channel, volume and Channel mute. e. Select "Advanced" to turn the flow lamp on or off. The range of the shutoff delay: 0 - 255s. f. Select "Configuration wizard" to enter the high level, low level, or output configuration wizard. g. Select "Firmware update", select the update file from the popup dialog box, and then click "Update" to update the firmware. When the update progress reaches 100%, it means the firmware is updated successfully. Click "Confirm" to exit the firmware update. After the update, the DSP will be restarted automatically. h. Select "Restore factory settings". All the settings of the DSP will be reset to the factory defaults. i. Select "Language" to switch between Chinese and English. j. Select "About" to check the device version. (3) Click "Lock": Enter a 6-digit password in the popup dialog box to encrypt the tuned sound effect data. You can encrypt the EQ frequency, Q value and gain value data. The tuning data as delay time, channel, and phase equalizer settings will also be encrypted. The encryption is only effective for the sound effect data currently used, instead of all the data of the DSP. The encrypted sound effect data can be saved as the preset sound effects or PC files. Copying or transmission will not decrypt the data. Click "Unlock" to enter the correct password to decrypt the locked data. The initial password is "888888". Warning! Please remember your password; otherwise, the encrypted data cannot be unlocked. Setting the Input Mode Click "Input mode" to enter the high level and low level input setting interface. Select high or low level input mode by scrolling your mouse wheel or dragging the scroll bar. Click "Clear all" to enter the customization operation interface. Note: the "Clear all" button is invalid in the customized setting interface. 1. High level input selection (1) Front Sound Field Stereo (2CH): Front Left and Front Right channels of IN 1 and 2 are set to Full-range. (2) Four-CH (4CH): Front Left and Front Right channels of IN 1 and 2 are set to Full-range; Rear Left and Rear Right channels of IN 3 and 4 are set to Full-range. (3) Four-CH + FC (5CH): Front Left and Front Right channels of IN 1 and 2 are set to Full-range; Rear Left and Rear Right channels of IN 3 and 4 are set to Full-range; IN 5 is set to Subwoofer. 15