Alpine PXE-X09 Owners Manual - Page 24
Sound Effect Presets, Setting the Master Volume and, Sound Source, Copy and Paste Function, Spectral
View all Alpine PXE-X09 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Software for PC Sound Effect Presets Loading and storage of sound effect presets. Click "Call" or "Store" to set the six sound effect presets. Setting the Master Volume and Sound Source Master volume adjustment, sound source selection, and output signal display section. Coaxial, Bluetooth, High Level, Low Level, and Off. Note: W hen a sound source is selected, it cannot then be selected again as the auxiliary sound source; doing so causes the auxiliary sound source to be invalid. Optical and Coaxial cannot be selected at the same time. Copy and Paste Function In the output or input channel section, right-click to copy the EQ, Volume, and Mute values of the channel, and then paste those values to another channel. Spectral Diagrams of Output Channels This window shows the spectrum state of the output channels. 1. Adjusting the master volume: Adjust the volume by either clicking and dragging the volume slider, or by scrolling the mouse wheel, from 0 to 35. The volume is set at 27 by default. 2. Mute button: Click the " " button in the master volume settings section to set the main volume to mute " " or click it again to unmute (adjusting the master volume will unmute it automatically). 3. Main sound source selection: Click the buttons under the main sound source and select the source from the popup window. Options include Optical, Coaxial, Bluetooth, High Level, and Low Level. 4. Auxiliary sound source selection: Auxiliary sound sources are mixed in a similar fashion. (1) The higher the attenuation of the main sound source, the lower the master volume. The available values are: 30%, 50%, 80%, 100%, and Off. (2) Click the keys under the auxiliary sound source and select from the popup window. Options include Optical, 22 1. Display window: The window is scalable and can be set to full screen. 2. Selecting the channel to display: (1) Fixed: Only the spectrum of the selected output channel is displayed; it cannot be switched to other output channels. (2) Follow: The spectrum of the selected output channel will be displayed. (3) Click the dropdown list to select a channel in order to display its spectrum.