Alpine X009-GM2 Owner's Manual (english) - Page 46
Switching Display Modes, Adjusting the Live Contrast
View all Alpine X009-GM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2 Touch [ ] of the desired item. Settable items differ depending on the application. [Video] (Video media): Display Mode / Live Contrast / Visual EQ / Brightness / Color / Tint / Contrast / Sharp [Direct Camera]*: Live Contrast / Brightness / Color / Contrast [AUX Camera]*: Live Contrast / Brightness / Color / Contrast [Navigation]: Brightness / Contrast * The camera names set under the "Direct Camera/AUX Camera" settings are displayed. The camera names are not displayed when "Off" is set (pages 64, 65). 3 Touch [ ] or [ ] to change its setting. 4 Touch [ ] to return to the previous screen. • Immediately after changing the settings of Display Setup (While the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. Switching Display Modes Setting item: Display Mode Setting contents: WIDE (Initial setting) / CINEMA / NORMAL In WIDE mode, the monitor displays a normal picture wider to fit in a wide-screen monitor by evenly stretching out the picture horizontally. In CINEMA mode, the monitor displays a normal picture by stretching out the picture horizontally and vertically. This mode is good for displaying a cinema type picture at the 16:9 ratio. Adjusting the Live Contrast This function automatically adjusts the areas on the screen that are too bright or too dark and corrects them to natural brightness. Setting item: Live Contrast Setting contents: OFF (Initial setting) / LOW / HIGH Selecting the Visual EQ Mode (Factory's setting) You can select a mode suitable for the subject image. Setting item: Visual EQ Setting contents: OFF (Initial setting) / NIGHT M. / SOFT / SHARP / CONTRAST OFF: Initial Setting NIGHT M.: Suitable for movies in which dark scenes frequently appear. SOFT: Suitable for CGs and animated films. SHARP: Suitable for old movies where images are not clearly shown. CONTRAST: Suitable for recent movies. • To return to the default video settings, set this function to OFF. Any Visual EQ selection or changes made are reset their initial settings. Adjusting Brightness Setting item: Brightness Setting content: -15 to +15 (Initial setting: 0) You can adjust the brightness between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. Adjusting Color of Picture Setting item: Color Setting content: -15 to +15 (Initial setting: 0) You can adjust the Color between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. Adjusting Tint of Picture Setting item: Tint Setting content: R15 to G15 (Initial setting: 0) Adjust the Color from R15 to G15. In NORMAL mode, the monitor displays a normal picture at the center of the screen with a vertical black band at each side. 46-EN