Alpine X009-GM2 Owner's Manual (english) - Page 51
Adjusting the Time Correction (Time Correction), Calling the Time Correction Value
View all Alpine X009-GM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Adjusting the Frequency Touch [ ] or [ ] of "Freq." to adjust the frequency of the selected band. Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps) Band1: 20 Hz~100 Hz (63 Hz) Band2: 63 Hz~315 Hz (125 Hz) Band3: 125 Hz~500 Hz (250 Hz) Band4: 250 Hz~1 kHz (500 Hz) Band5: 500 Hz~2 kHz (1 kHz) Band6: 1 kHz~4 kHz (2 kHz) Band7: 2 kHz~7.2 kHz (4 kHz) Band8: 5.8 kHz~12 kHz (8 kHz) Band9: 9 kHz~20 kHz (16 kHz) Adjusting the Level Touch [ ] or [ ] of "Level" to adjust the level of selected band. Setting contents: -7 to +7 (Initial setting: 0) Setting the Bandwidth Touch [ ] or [ ] of "Q Adjust" to select the bandwidth. Setting contents: Wide (Initial setting) / Medium / Narrow 2 To adjust another band, repeat step 1, and adjust all bands. 3 To store the adjusted setting value, touch and hold [Preset1], [Preset2], or [Preset3] for at least 2 seconds. • BAND2 and BAND8 are the same as the Bass and Treble controls. Their Level adjustment can also be controlled by pressing and holding / AUDIO and selecting Bass Level or Treble Level. Refer to "Easy Sound Setup mode" on page 24. • Settings exceeding the frequency of adjacent bands are not available. • While adjusting the Parametric EQ, you should consider the frequency response of the connected speakers. • When the parametric EQ is adjusted, the Equalizer Presets are overridden. • When Equalizer Presets is set, the linked Parametric EQ settings are also changed. We recommend storing Parametric EQ settings in a Preset in advance. • Touch [Flat] to initialize all values. • The Parametric EQ setting can be configured when Defeat is "Off". Calling the Parametric EQ adjusted value Calling the pre-set Parametric EQ adjusted value. Touch [Preset1], [Preset2], or [Preset3] on the Parametric EQ screen. The setting stored in the Preset will be recalled. Adjusting the Time Correction (Time Correction) [Time Correction] is selected on the Sound setup menu in step 3. Refer to "Sound Setup Operation" (page 48). Before performing the following procedures, refer to "About Time Correction" (page 53). Setting item: Time Correction 1 Touch [cm], [inch] or [ms] to select mode for making adjustments. Each time you touch, the onscreen button and correction mode changes. Correction mode cm/inch: Adjust listening position and distance from each speaker. ms: Adjust time. 2 Touch [ ] or [ ] for each speaker to adjust the time or distance. 0.0 msec to 9.9 msec (0.1 msec/step) 0.0 cm (0.0 inch) to 336.6 cm (132.7 inch) (3.4 cm/step) All speaker setting values are adjustable in the range of 15 ms or 510 cm. 3 To store the adjusted setting value, touch and hold [Preset1], [Preset2], or [Preset3] for at least 2 seconds. • Touch [Flat] to set all values to 0.0. • If the Rear Speaker setting is "Off", the Rear Speaker setting cannot be edited (refer to page 49). • If the Subwoofer setting is "Off", the Subwoofer setting cannot be edited (refer to page 49). Calling the Time Correction Value Calling the pre-set time correction value. Touch [Preset1], [Preset2], or [Preset3] on the time correction screen. The setting stored in the Preset will be recalled. 51-EN