Alpine X009-GM2 Owner's Manual (english) - Page 55
Source Setup, Source Setup Operation, Source Layout Setting, Setting the Slide Source Change
View all Alpine X009-GM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Source Setup Source Setup Operation Source Layout Setting [Source Layout] is selected on the Source setup menu in step 3. Refer to "Source Setup Operation" (page 55). To display the Source Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the Source mode operation has been released. Engaging the parking brake can reactivate the Source Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the Source mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the Source mode screen." The following steps 1 to 5 are common operations to each "Setting item" of Source Setup. Refer to each section for details. 1 Touch [Setup] icon of Top banner. The Setup main screen is displayed. 2 Touch [ (Source)]. The Source Setup screen appears. 3 Select the desired item. Setting the Slide Source Change You can set whether to switch sources by swiping from the designated area of the Audio/Visual Playback screen from right to left or from left to right. Refer to "Switching Sources" (page 28). Setting item: Slide Source Change Setting contents: On (Initial setting) / Off On: Source is changed by a swipe gesture. Off: Source is not changed by a swipe gesture. Setting the Easy Sound Setup Position You can select this menu displayed on left or right of screen. Setting item: Sound Setup Position Setting contents: Left (Initial setting) / Right Customizing the Source Banner You can customize the Source Banner order as you prefer. The source switching order is displayed according to your changes. Setting items: Source Layout / Disc / SiriusXM / Auxiliary (AUX) / Rear Seat Entertainment (RSE) / Bluetooth Pandora / TuneIt 4 Touch [ ] or [ ] etc., to change its setting. • When the pop-up window for setup is displayed, touch [ ] to close the window after setting. 5 Touch [ ] to return to the previous screen. • Immediately after changing the Source Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. Setting item: Source Banner Customize Take adjusting the order of Disc and AUX 1 as an example: 1 Touch the desired source icon ([Disc] etc.). The [Disc] source icon is displayed highlighted. Touch this icon again to cancel. 2 Touch another source icon ([AUX 1] etc.). The Source Banner positions for [Disc] and [AUX 1] are swapped. 55-EN