Alpine iXA-W407 Owners Manual - Page 13
Other Useful, Features - time adjustment
View all Alpine iXA-W407 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Other Useful Features Adjusting the Audio 1 Press and hold SETUP for at least 2 seconds. The SETUP selection screen is displayed. 2 Touch [ ] of Audio Setup. The AUDIO SETUP screen appears. Display example for AUDIO SETUP Screen cursor* * When a setting or search list is activated, a cursor appears. • Touching [ ] or [ ] will scroll the list one line at a time. • Touch [ ] to return to the previous list screen. Touch and hold [ ] for at least 2 seconds will return to the main source screen that was displayed before the setup operation was started. • The A.Processor menu items will differ depending on which optional audio processor is connected. The IMPRINT audio processor (PXA-H100) or External Audio processors may be used. For details, refer to "IMPRINT Operation (Optional)" (page 31) or "External Audio Processor (Optional)" (page 25). Adjusting Balance/Fader Touch [ ] of Balance/Fader, the adjusting screen of Balance/Fader will be displayed. Display example for BALANCE/FADER Screen B Adjusting the Balance Touch [L] or [R] to adjust the sound volume of the left and right speakers. Setting range: L15 to R15 BC Adjusting the Balance/Fader Directly Touch and move [ ] to a desired setting. Or touch a desired setting range, and [ ] will move to that location. Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning. Turning Defeat ON or OFF Touch [ ] to display the Defeat adjusting screen. Touch [ ] or [ ] of Defeat to set to ON or OFF. If you set the defeat to ON, MX of an external audio processor is turned OFF and EQ is returned to the initial setting. Adjusting NAV. Mix Level Touch [ ] or [ ] of NAV. Mix Level to adjust the volume of navigation interruption. Setting range: 0 to 15 • This adjustment becomes available when NAV. Mix is turned ON in "Setting the Navigation Interruption" (page 20). Adjusting the Subwoofer Level Touch [ ] or [ ] of Subwoofer to set the subwoofer ON/OFF. Touch [ ] to display the Subwoofer output adjusting screen after setting the Subwoofer to ON. Touch [ ] or [ ] to adjust the Subwoofer output. Setting range: 0 to 15 • When an external processor is connected, the display changes from "Subwoofer" to the "SubW. LV" item. You can change the subwoofer output level between 0 and 15 by touching [ ] or [ ]. • The Subwoofer System, Subwoofer Phase and Subwoofer Channel may be set when an optional IMPRINT audio processor (PXA-H100) is connected, Subwoofer is set to ON, and MultEQ OFF mode is selected. For details, refer to "Setting the Subwoofer" on page 35. Adjusting H.P.F. (Highpass Filter) Touch [ ] to display the H.P.F. adjusting screen. Touch [ ] or [ ] of the desired speaker. Setting range: OFF, 60 Hz, 80 Hz, 100 Hz • Select OFF when no adjustment is required. • When an external processor or IMPRINT audio processor (PXA-H100) is connected, the display changes from "H.P.F." to the "A.Processor" item. For "A.Processor" operation, refer to "External Audio Processor (Optional)" on page 25 or "IMPRINT Operation (Optional)" on page 31. A Adjusting the Fader Touch [F] or [R] to adjust the volume of the front and rear speakers. Setting range: F15 to R15 • If an IMPRINT audio processor (PXA-H100) is connected to this unit and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.) switch of the IMPRINT audio processor (PXA-H100) to 2.2ch (3WAY), you cannot adjust the Fader mode. For details, refer to the Owner's Manual of PXA-H100. 11-EN